The key ways to solve the problem of small water flow from the faucet include checking the water pressure, clearing the clogged parts, troubleshooting piping problems and adjusting the valve status. Specific solutions need to be based on the cause of the blockage (such as faucet filter, piping aging, water valve is not open) and external factors (such as water supply facilities failures) targeted processing

Check the water pressure and valve status

The main valve is not fully open: If the water valve at home is half-open, it will lead to insufficient water pressure, which needs to be readjusted to the fully open position. Failure of secondary water supply facilities: High-rise residential buildings may experience insufficient pressure during peak hours, so you need to contact the property owner for repairs or stagger the use of water. Install a booster pump: If the water pressure is low for a long time, a booster pump can be installed after the water meter to enhance the water flow. 

Clear clogged parts

Filter or bubbler cleaning: Remove the faucet spout filter to remove scale and impurities (steps include disassembly, brushing, and reassembly). 

Spool Maintenance: Remove handle after closing angle valve, clean spool deposits and reinstall. 

Troubleshooting Water Leaks and Plumbing Problems

Pipe leakage detection: Turn off all water equipment and then observe the water meter rotation, if it continues to rotate the pipeline needs to be repaired. Pipe Caliber Adjustment: If the water pipe diameter does not match the main water pipe (too large or too small), replace the pipe with one of the appropriate caliber. 

Avoid excessive bending: reduce the number of water pipe bends can effectively maintain water pressure.